Used and Refurbished

Used and Refurbished Medrad Spectris Solaris MRI Injectors

We supply, refurbish and install Medrad Spectris Solaris and Solaris EP contrast injectors for MRI, and we service them afterwards. Veteran-owned.

This page covers the MRI side. For the CT injector see used Medrad Stellant, and for the overview see refurbished contrast injectors.

Every unit goes through our 22-point acceptance process before it is installed, with the signed report handed to you at installation.

Spectris Generations, and Which One You Have

These three are not interchangeable and the names get used loosely. Identify which you need before you buy.
Medrad Spectris Solaris EP MRI contrast injector head, front view showing the A and B syringe controls and air-expelled indicator

Which Spectris?

Syringe kits for this platform: Spectris dual syringe kit for the original Spectris, and Spectris Solaris syringe kit for the Solaris and Solaris EP. Every part number is on the syringe cross reference.

Spectris
The original MRI injector. Discontinued by Bayer and still running in a lot of rooms. We supply the syringe kits for it. We do not sell or service the machine.
Spectris Solaris
The successor, pairing contrast and saline. Takes the SSQK 65/115VS equivalent kit (also written SSQK65VS and SSQK115VS).
Spectris Solaris EP
The current generation, with a published Bayer end of life date of 12/31/2028. That date drives most of today's used market.
Not sure which you have?
Send a photo of the label on the injector head and the part number on your syringe box. That identifies it in one message.

What You Get at Installation

Not dropped on a loading dock. Every unit arrives ready to run patients.
Medrad Spectris Solaris EP MRI contrast injector on its rolling pedestal stand

Ready the Day It Goes In

After installation we are still the people who service it. See injector service and support.

Signed PM report
All 22 points, with serial numbers and software version recorded. Yours at installation.
Syringe kits
Enough to run patients on day one. We supply the reorders too.
Delivered and installed
Delivered, mounted, powered up and demonstrated in your room. Not left on a loading dock.
90-day parts warranty
Replacement parts and remote support. The clock starts at installation, not shipment.
22-point acceptance, part 1

Inspected and Resealed

Every Spectris Solaris goes through our 22-point acceptance process before it is installed. The first half is hands-on: open it up, clean it, check it, reseal it.
Medrad Spectris Solaris EP MRI contrast injector head, front view showing the A and B syringe controls and air-expelled indicator

What Gets Opened Up

Covers, gaskets, drive and syringe interface. In the magnet room the work is done with a non-magnetic titanium #2 Phillips, the one tool the job really needs.

Console and hand switch
The display is decontaminated and inspected for screen condition. The hand switch is checked for clean, positive action.
Head covers and gaskets
Front and rear head covers are inspected and their gaskets replaced. Lens caps and manual knobs are checked for cracks and smooth travel.
Syringe wells and drive cables
The syringe wells and their gasket are inspected for integrity. The drive shaft cables that carry motion out to the head are checked for wear.
Ball screws greased, pedestal checked
The ball screws are cleaned and given a light coat of fresh grease. Pedestal covers and casters are checked so the head moves and locks where you need it.
22-point acceptance, part 2

Tested Before It Leaves

The second half proves it works. Every result is recorded on the report you receive at installation.
Medrad Spectris Solaris EP MRI contrast injector on its rolling pedestal stand

What Gets Tested

Both sides, independently, every unit. Not a sample.

Operational check
Date and time are set, then full operation is exercised from the console. Forward and reverse load controls are cycled on both sides.
Syringe position
Syringe position is verified on each side against a measured volume. The system knows where the plunger is before it ever injects.
Flow and volume
Each side runs a timed test injection. Duration and delivered volume are measured against manufacturer tolerance.
Pressure and electrical safety
The pressure limit is verified on each side against its rated set point. Ground resistance and leakage current are measured before release.

Four Things to Check Before You Buy a Used MRI Injector

Siting is the one that gets missed on a CT-shaped checklist.
Medrad Spectris Solaris EP MRI contrast injector head, front view showing the A and B syringe controls and air-expelled indicator

Ask Before You Buy

Independent service on the legacy Bayer MRI line is thin. See Spectris Solaris troubleshooting.

Which generation it actually is
Spectris, Solaris and Solaris EP are not interchangeable, and sellers use the names loosely. The label on the head settles it.
Where the head will stand in your room
Siting depends on your magnet's field and your room geometry. A unit that worked in the seller's room may not sit where you need it in yours.
Whether the consumables are still supplied
Both platforms are covered by current third-party kits. That is the main reason a legacy Spectris is still worth owning.
Who will service it afterwards
Few independents work on this line. We service the Spectris Solaris and Solaris EP, and we supply kits for the original Spectris.
Show steps

How Buying One Works

1

Tell us the generation and the magnet

Spectris, Solaris or Solaris EP, and what magnet and room it is going into. Photos of the room help more than a spec sheet.

2

We match a unit to that requirement

We match a unit to what you actually need and tell you its condition before you commit. We do not sell from a fixed list.

3

Delivered, sited and installed

Delivery and installation are included in the price, and siting relative to your magnet is part of the install.

4

90-day parts warranty, then service

Parts and remote support for 90 days from installation. Afterwards we are still the people who service it and supply the kits.

Frequently Asked Questions

It depends on the generation, its condition, what comes with it and what is available. We quote against a requirement rather than from a fixed list. Tell us which generation you need and what magnet it is going next to.

Yes. 90 days on parts, parts and remote support, from the date of installation.

Not by itself. End of life is an OEM support date, not the day the machine stops. It does mean OEM service and parts wind down and independent service plus third-party consumables become how these units keep running. Read what Bayer actually published.

No. The head goes into the magnetic field and has to be MR Conditional and sited accordingly. This is not a cost-saving substitution, it is a safety one.

Yes. Delivery and installation are included, and siting relative to your magnet is part of the install, not an afterthought.

Usually, and for an upgrade it is the cleanest way to do it. Tell us what you are replacing and we quote the replacement with the trade already in it. See what we buy.

Yes, for both platforms. See MRI injector syringes.

Yes. Call 615-479-5572 or use the form below.

Upgrading From an Injector You Already Run

Most Spectris rooms we quote already have an injector standing in them. The old one is part of the deal, not a separate job you have to solve first.

Trade the old one against the new one

One quote, with what your existing injector is worth already taken off it. Simpler than selling a used injector yourself, and it keeps the room covered. What we pay for used injectors.

Moving up a generation

Legacy Spectris to a Solaris, or a Solaris to a Solaris EP. Tell us which you run and what you want it to do, and we will tell you honestly whether the move is worth the money or whether keeping what you have running is the better call.

Siting is part of an upgrade, not an afterthought

A different generation of head does not necessarily stand where the old one stood. Where it can sit depends on your magnet and your room, and we look at that while we are quoting rather than on the day it arrives.

No obligation

Tell us the generation and the magnet

Which Spectris you need, what magnet it is going next to, and your timeline. If you are replacing an existing injector, tell us what it is.

Request an injector quote

We reply by the next business day.

Or call 615-479-5572.